STOCK
OUR STOCK
No matter how large or small your steel fabricating job is, our experienced team at Truck Master Manufacturing & Equipment LTD. is equipped to handle any job! From canopies to decks, we have a wide selection of high-quality stock that you can browse on this page.
For more information, contact our office by giving us a call today.
8’ SERVICE CANOPY
- 8' Aluminum Slide in Canopy
- 8’ box (dual-wheeled) required
- 100% aluminum construction
- Nose cone reinforced to accommodate compressor
- (2) side access doors on gas shocks (top opening)
- Aluminum extruded doors with stainless steel locks and hinges
- Rear access entry
- 72” inside height
- (7) locking drawers located at left rear side
- (7) locking drawers located at right rear side
- (2) 7” dome lights controlled by a switch located by the rear access door
- Optional: Dome lights and/or heater wired to master switch in truck cab
- Optional: Fold down work table located on front wall of service canopy
- Optional: Heater
- Optional: Hitch mounted access step
- Painted white (polyurethane)
- Installation not included
$37,750.00 ON SALE $35,000.00
8' ECONOMY DECK
-
8' Economy Deck
-
79 ½" wide x 102" long
-
8 ft. box take-off (single wheel) required
-
Approx. 650 lbs.
-
2" tubing bulkhead c/w kick plate and mesh filler
-
Stake pockets
-
2" x 8" wood decking
-
Painted black
-
Rubber set tail/signal, back up and marker lights
-
Mud flaps
-
Factory rear bumper and hitch remain
-
Installation not included
$4,260.00 ON SALE $3,995.00
9’ DECKS
-
9' Deck with Power Liftgate
- 60” c/a cab chassis (dual-wheeled) required
- 3” channel cross sills at 16” centres
- 4” channel main sills
- 2” tubing bulkhead c/w kick plate, mesh filler and tapered top corners
- 2” x 8” spruce decking (painted)
- Rubber set marker lighting as per CMVSS
- Factory chassis tail/signal lights used
- Mud flaps and anti- sail brackets
- (2) 18” x 18” x 36” under deck toolboxes (stainless door)
- Painted black (enamel)
- 12” high hinged sides and rear tailgate
- Theiman #M20ET tuck away liftgate
- 2000 lbs lift capacity
- Installation not included
$14,250.00 ON SALE $12,115.00
COURIER DECK
-
8' Courier Deck (Box Take Off)
- 8’ box take off (single wheel) required
- 2” tubing bulkhead c/w kick plate and mesh filler
- Stake pockets
- 2” x 8” spruce decking
- Cab guard
- 12” high hinged sides and tailgate
- 3 piece removable rear pipe rack
- Rubber set tail/signal, back-up and marker lights as per CMVSS
- Mud flaps
- Factory rear bumper and hitch remain
- Painted black (enamel)
- Installation not included
$6,295.00
-
12' Courier Deck
- 84” c/a cab chassis (dual wheeled) required
- 96” x 144” clear deck area
- 2” tubing bulkhead c/w kick plate and mesh filler
- 2” x 8” spruce decking (painted)
- 16” high sides and rear tailgate
- Pockets inside of deck sides for strapping loads (3 per side)
- 3 piece removable rear pipe rack
- Rear pipe rack storage at front of bulkhead
- ICC style rear bumper
- Rubber set marker lighting as per CMVSS
- Mud flaps and anti-sail brackets
- Factory tail/signal lights used
- Painted black (enamel)
- Installation not included
$11,575.00
PILOT SIGN RACK
BOXES
Aluminum Pilot Sign and Rack
- 100% aluminum construction
- (2) LED compact mini light bars
- (4) LED amber flasher lights
- Bolt on side panel for easy sign change or removal
- Exterior and interior painted white (polyurethane)
- Aluminum square tubing rack
- Spring bolts to support sign in upright position
- 6 pole plug between sign and truck for easy removal
- Manual lift sign box
- Alberta traffic safety act compliant
- Flag holders and aftermarket switch panel available
- Installation not included
$5,835.00
1/8" Aluminum SPV Box
- 24.5" deep x 25" high x 24.5" wide
$635.00
10 Gauge Steel Box
- 24" deep x 20" high x 30" wide
- Steel door
$365.00 each
Available Quantity: 2
1/8" Aluminum SPV Step Box
- 24" deep x 24" high x 24" wide
$650.00 each
Available Quantity: 2
1/8" Aluminum Checker Side Box
- 17" deep x 16" high x 48" wide
- 16" checker door
$885.00 each
Available Quantity: 2
1/8" Aluminum SPV Chain Saw Box
- 15" deep x 13.75" high x 38" wide
$347.50
12 Gauge Steel Box
- 18" deep x 18" high x 36" wide
- Steel door
$475.00
1/8" Aluminum Checker Underbody Box
- 24” deep x 24” high x 36” wide
- 100% aluminum construction
- 1/8” aluminum checker overlap doors
- Check cables
- Stainless steel T-handles and hinges
- Shelf 12” up from bottom
$1,500.00
Aluminum Side Box
- Part # 178-0001
$865.00
CABINETS & OTHERS
1/8" Aluminum Box
- 24” deep x 64” high x 48” wide
- 100% aluminum construction
- 1/8” aluminum flush mount overlap doors
- Stainless steel T-handle and hinges
- (10) aluminum hooks located at top of box
- (2) 5” drawers on HD self- locking grant slides
- (1) shelf above drawers
- Exterior painted black (polyurethane)
$4,800.00 each
Available Quantity: 2
3/16" Aluminum Cabinet
- 26 3/8” deep x 33” high x 60” wide
- 100% SPV aluminum construction
- 1/8” aluminum SPV flush mount barn style doors
- HD stainless steel hinges and bar lock
- Washout bottom
- Door hold backs
$3,430.00 each
Available Quantity: 2
14" Dump Trailer
- 2005 Trailtech 14' gooseneck dump trailer
- Model: 270HD GN
- Tandem 6000# axles
- Painted black polyurethane (Endura)
- Newer tires and brakes
- New deep cycle battery
- Set up for roll up tarp but no tarp included
$10,500.00
Aluminum Checker Running Boards
- Fits 2006 Ford F-350 crew cab
$498.75
Black Mesh Cover-up Tarp
- 82''w x 20' long
- New
$525.00 each
$429.00 each
Available Quantity: 2
Checker Plate Fenders
- 29''w x 45'' long
$1,915.00 each
Available Quantity: 2
3/16" Aluminum Checker Cabinet
- 36” deep x 48” high x 24” wide
- 100% aluminum construction
- 1/8” aluminum checker plate door c/w centre stiffener
- Check cables
- Stainless steel T-handle and hinges
MORY STOCK
We are also an authorized dealer for the Mory brand.